usblpo.blogg.se - Allmänt

Integrated 3.3V level converter for USB I/O.Support for bus powered, self powered, and high-power bus powered USB configurations.Device supplied preprogrammed with unique USB serial number.Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.256 Byte receive buffer and 128 Byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.

FIFO receive and transmit buffers for high data throughput.

New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.

Transmit and receive LED drive signals.

Auto transmit buffer control for RS485 applications.

In-built support for event characters and line break condition.

Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).

Fully assisted hardware or X-On / X-Off software handshaking.

UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.

Entire USB protocol handled on the chip – No USB-specific firmware programming required.

Single chip USB to asynchronous serial data transfer interface.

Press releases, articles and web links related to the FT232R can be found here.Ī frequently asked questions page has been created here.

The FT232R is available in Pb-free (RoHS compliant) compact 28-Lead SSOP and QFN-32 packages. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. The FT232R adds two new functions compared with its predecessors, effectively making it a “3-in-1” chip for some application areas. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device. In addition, asynchronous and synchronous bit bang interface modes are available. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID™ security dongle feature. The FT232R is added to FTDI’s range of USB UART interface Integrated Circuit Devices.